LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Yaris SE, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> AIR FUEL RATIO SENSOR (for Sedan) >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

AIR FUEL RATIO SENSOR (for Sedan): Removal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE AIR FUEL RATIO SENSOR 
    Fig 1: Remove/Install Air Fuel Ratio Sensor
    GTY337575Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the air fuel ratio sensor connector and clamp.
    2. Using SST, remove the air fuel ratio sensor.
      • SST: 09224-00010 
scientia non olet · About LEMON Manuals