Cruise Control Main Switch: Inspection: Inspection

INSPECT CRUISE CONTROL MAIN SWITCH

for Cruise Control:

Measure the resistance according to the value(s) in the table below.

Fig 1: Inspecting Cruise Control Switch

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

*1	Cruise Control Switch (ON-OFF button)	-	-
*a	Component without harness connected (Cruise Control Switch)	*b	ON-OFF
*c	+/RES	*d	-/SET
*e	CANCEL	-	-

Standard Resistance

Tester Connection	Switch Condition	Specified Condition
1 - 3	Cruise control switch (ON-OFF button) released	1 MΩ or higher
	Cruise control switch (ON-OFF button) pushed	Below 2.5 Ω
	+/RES	235 to 245 Ω
	-/SET	617 to 643 Ω
	CANCEL	1509 to 1571 Ω

for Dynamic Radar Cruise Control:

Measure the resistance according to the value(s) in the table below.

Fig 2: Inspecting Cruise Control Main Switch With Connector End View

TEXT IN ILLUSTRATION

*1	Cruise control switch (ON-OFF button)	-	-
*a	Component without harness connected (Cruise Control Switch)	*b	ON-OFF
*c	+/RES	*d	-/SET
*e	MODE	*f	CANCEL

Standard Resistance

Tester Connection	Switch Condition	Specified Condition
1 - 2 1 - 3	Cruise control switch ON-OFF button not pressed	1 MΩ or higher
1 - 3	Cruise control switch ON-OFF button pressed	Below 2.5 Ω
1 - 2	MODE	Below 2.5 Ω
1 - 3	+/RES	235 to 245 Ω
1 - 3	-/SET	617 to 643 Ω
1 - 3	CANCEL	1509 to 1571 Ω