LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Prius Two >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (Service Information) (Except Plug-In) >> Oil Pressure Switch >> Inspection >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Oil Pressure Switch: Inspection: Inspection

  1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. Disconnect the oil pressure switch connector.
    2. Start the engine.
    3. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Engine Oil Pressure Switch Assembly
      GTY147711Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - Switch body Idling 10 kΩ or higher
      1 - Switch body Engine stopped Below 1 Ω

      If the result is not as specified, replace the oil pressure switch assembly.

    4. Reconnect the oil pressure switch connector.
scientia non olet · About LEMON Manuals