Speed Sensor: Installation: Installation

INSTALL SPEED SENSOR NC
1. Coat a new O-ring with ATF WS and install it to the speed sensor.
2. Install the speed sensor with the bolt.
  
  Fig 1: Installing Speed Sensor NC
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
3. Connect the sensor connector.
INSTALL SPEED SENSOR NT
1. Coat a new O-ring with ATF WS and install it to the speed sensor.
2. Install the sensor with the bolt.
  
  Fig 2: Locating Speed Sensor NT And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
3. Connect the sensor connector.
INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY
1. Apply ATF to a new O-ring, and install it to the transmission oil filler tube sub-assembly.
2. Install the transmission oil filler tube sub-assembly to the automatic transaxle with the bolt.
  
  Fig 3: Locating Transmission Oil Filler Tube Sub-Assembly And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
3. Connect the transmission wire connector, park/ neutral position switch connector and 2 wire harness clamps.
4. Install the transmission oil level gauge sub-assembly to the transmission oil filler tube sub-assembly.
INSTALL BATTERY CARRIER . Refer to INSTALLATION - Step 62
INSTALL BATTERY . Refer to INSTALLATION - Step 63
INSTALL AIR CLEANER CASE . Refer to INSTALLATION - Step 64
INSTALL AIR CLEANER CAP SUB-ASSEMBLY . Refer to INSTALLATION - Step 2
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 93
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL . Refer to INSTALLATION - Step 77