LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Land Cruiser >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (3UR-FE) (Service Information) >> Throttle Body >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Throttle Body: Removal: Removal

  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH  . Refer to REMOVAL - Step 3
  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH  . Refer to REMOVAL - Step 4
  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 18
  4. DRAIN ENGINE COOLANT  . Refer to REPLACEMENT - Step 4
  5. REMOVE V-BANK COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 23
  6. REMOVE AIR CLEANER HOSE ASSEMBLY  . Refer to REMOVAL - Step 9
  7. REMOVE THROTTLE BODY ASSEMBLY 
    1. Disconnect the 2 water by-pass hoses.
      Fig 1: Locating Throttle Position Sensor And Control Motor Connector
      GTY147691Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the throttle position sensor and control motor connector.
    3. Remove the 4 bolts, throttle body and gasket.
      Fig 2: Locating Throttle Body & Gasket With Bolts
      GTY147692Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the 2 water by-pass hoses from the throttle body.
scientia non olet · About LEMON Manuals