LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Camry LE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2AR-FE) (Service Information) (Except Hybrid) >> Integration Relay >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Integration Relay: Removal: Removal

  1. REMOVE NO. 1 RELAY BLOCK COVER 
  2. REMOVE NO. 1 INTEGRATION RELAY 
    1. Disconnect the connector.
      Fig 1: Identifying No. 1 Integration Relay Connector
      GTY319756Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the No. 1 integration relay.
      Fig 2: Identifying No. 1 Integration Relay Claws
      GTY320937Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the 4 connectors and remove the No. 1 integration relay.
      Fig 3: Identifying No. 1 Integration Relay Connectors
      GTY320851Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals