LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Venza Limited, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2GR-FE) (Service Information) >> Accelerator Pedal >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Accelerator Pedal: Removal: Removal

  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY 
    1. Disconnect the accelerator pedal sensor assembly connector.
      Fig 1: Locating Accelerator Pedal Sensor Assembly Bolts And Connector
      GTY251277Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and accelerator pedal sensor assembly.
      NOTE:
      • Avoid physical shocks to the accelerator pedal sensor assembly.
      • Do not disassemble the accelerator pedal sensor assembly.
scientia non olet · About LEMON Manuals