LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Prius Three >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Except Plug-In) (Service Information) >> Crankshaft Position Sensor >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crankshaft Position Sensor: Removal: Removal

  1. REMOVE REAR ENGINE UNDER COVER RH 
  2. REMOVE NO. 1 ENGINE UNDER COVER 
  3. REMOVE CRANK POSITION SENSOR 
    1. Disconnect the crank position sensor connector.
      Fig 1: Identifying Crank Position Sensor Connector
      GTY224176Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and crank position sensor.
      Fig 2: Identifying Crank Position Sensor & Bolt
      GTY231952Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals