LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Matrix Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Door Lock (Service Information)) >> Unlock Warning Switch >> Inspection >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Unlock Warning Switch: Inspection: Inspection

WARNING: This page is about a different car, the 2011 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT UNLOCK WARNING SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Unlock Warning Switch Assembly
      GTY197788Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 Switch free (Key removed) 10 kΩ or higher
      1 - 2 Switch pushed (Key set) Below 1 Ω

      If the result is not as specified, replace the unlock warning switch assembly.

scientia non olet · About LEMON Manuals