Installation

2AR-FE STARTING: ENGINE SWITCH: INSTALLATION

1. INSTALL ENGINE SWITCH

(a) Engage the 2 claws to install the engine switch.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Installation

5. INSTALL FRONT PANEL GARNISH LH Installation

6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation

7. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

8. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

9. INSTALL INSTRUMENT SIDE PANEL LH Installation

10. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation

11. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

12. INSTALL FRONT DOOR SCUFF PLATE LH Installation

13. INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)

Installation.

14. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System)

Installation.

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.