LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (3UR-FBE) (Service Information) >> Accelerator Pedal >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Accelerator Pedal: Removal: Removal

  1. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Disconnect the accelerator pedal position sensor connector.
      Fig 1: Locating Accelerator Pedal Position Sensor Connector
      GTY189483Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and accelerator pedal rod.
scientia non olet · About LEMON Manuals