LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Tundra Base, 4.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 346 (Audio/Visual) >> Audio And Visual System >> Pressing Power Switch does not Turn on System >> Inspection Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Inspection Procedure

WARNING: This page is about a different car, the 2009 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK VEHICLE CONDITION 
    1. Check that conditions in the cabin are not likely to cause condensation.

      HINT:

      This problem occurs when the cabin is humid and the temperature changes rapidly. This may produce condensation, resulting in a short circuit.

      OK: Condensation is not likely being produced. 

    NG: DRY OUT CABIN AND RECHECK CONDITION 

    OK: PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE )