LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Tundra Base, 4.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 342 (Brake Control) >> VSC Off Switch >> Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

VSC Off Switch: Inspection

WARNING: This page is about a different car, the 2009 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT VSC OFF SWITCH 
    1. Measure the resistance according to the value(s) in the table below.

    Standard resistance 

    STANDARD RESISTANCE REFERENCE

    Tester Connection Switch Condition Specified Condition
    3 - 4 Pressed Below 1 Ω
    Not pressed 10 kΩ or higher

    If the value is not as specified, replace the VSC off switch.

    Fig 1: Identifying VSC off Switch
    G06083779Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals