LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Tundra Base, 4.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 342 (Brake Control) >> Downhill Assist Control Switch >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Downhill Assist Control Switch: Installation

WARNING: This page is about a different car, the 2009 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL DOWNHILL ASSIST CONTROL SWITCH 
    1. Attach the 2 claws to install the downhill assist control switch into the lower No. 1 instrument panel finish panel.
    2. Connect the downhill assist control switch connector.
  2. INSTALL INSTRUMENT PANEL BOX  (See INSTALLATION )
    Fig 1: Identifying Lower No. 1 Instrument Panel Finish Panel Claws
    G06083782Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals