LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Tundra Base, 4.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Brake Control/Dynamic Control Systems) >> Rear Speed Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rear Speed Sensor: Removal

WARNING: This page is about a different car, the 2008 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE REAR WHEEL 
  2. REMOVE REAR SPEED SENSOR LH 
    1. Disconnect the rear speed sensor connector.
    2. Using a hexagon wrench, remove the bolt and the rear speed sensor.
      Fig 1: Locating Rear Speed Sensor LH
      G05649611Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002