LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2TR-FE) (Service Information) >> Camshaft Oil Control Valve >> Inspection >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Camshaft Oil Control Valve: Inspection: Inspection

  1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    Fig 1: Measuring Resistance Between Terminals Using Ohmmeter
    GTY180396Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard

        Tester Connection Specified Condition
        1 (+B) - 2 (GND) 6.9 to 7.9 kΩ at 20 °C (68 °F)

        If the result is not as specified, replace the camshaft timing oil control valve.

    2. Check the operation.
      Fig 2: Applying Battery Voltage Across Terminals
      GTY191689Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Apply battery voltage across the terminals, and check that the spool valve operates.
        NOTE:

        Check that the spool valve is not stuck.

        HINT: 

        The spool valve may not return if foreign objects are caught in it. This may cause subtle pressure leakage to the advance side, and a DTC may be set.

scientia non olet · About LEMON Manuals