LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Power Steering Oil Pressure Switch >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Steering Oil Pressure Switch: Removal: Removal

  1. DRAIN POWER STEERING FLUID 
  2. REMOVE POWER STEERING OIL PRESSURE SWITCH 
    1. Disconnect the power steering oil pressure switch connector.
    2. Using a 24 mm deep socket wrench, remove the power steering oil pressure switch.
      Fig 1: Identifying Power Steering Oil Pressure Switch, Deep Socket Wrench & O - Ring
      GTY187839Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the O-ring from the power steering oil pressure switch.
scientia non olet · About LEMON Manuals