LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Venza AWD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Power Management Control ECU >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal








POWER DISTRIBUTION: POWER MANAGEMENT CONTROL ECU: REMOVAL

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE RH Removal
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal
3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal
5. REMOVE POWER MANAGEMENT CONTROL ECU





(a) Disconnect the 2 connectors.
(b) Remove the 2 nuts and the power management control ECU.
scientia non olet · About LEMON Manuals