September 30: LEMON manuals is back up on a temporary server! Slowness is possible
VSC Off Switch: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See
INITIALIZATION
).
- REMOVE FRONT DOOR SCUFF PLATE LH
(See
REMOVAL
)
- REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH
(See
REMOVAL
)
- REMOVE LOWER NO. 1 INSTRUMENT FINISH PANEL SUB-ASSEMBLY
(See
REMOVAL
)
- REMOVE VSC OFF SWITCH
- Disengage the 2 claws and remove the VSC OFF switch.