LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Cruise Control System) >> Cruise Control System >> DTC Check/Clear
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Check/Clear

WARNING: This page is about a different car, the 2008 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. DTC CHECK 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Check the details of the DTC(s) (See DIAGNOSTIC TROUBLE CODE CHART  ).
  2. DTC CLEAR 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About LEMON Manuals