LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Tundra Base, 4.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine Control System (2TR-FE)) >> Accelerator Pedal >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Accelerator Pedal: Inspection

WARNING: This page is about a different car, the 2009 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard 

        TESTER CONNECTIONS SPECIFIED CONDITIONS CHART

        Tester Connection Specified Condition
        5 (EP1) - 4 (VCP1) 1M Ω or higher
        2 (EP2) -1 (VCP2) 1M Ω or higher

        If the result is not as specified, replace the accelerator pedal.

        Fig 1: Inspecting Accelerator Pedal Rod Assembly
        G05198453Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals