General Maintenance

TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY
1. Tighten the bolts and nuts on the chassis parts listed below, if necessary.
  - Front axle and suspension
  - Drive train
  - Rear axle and suspension
  - Brake system
  - Engine mounting
  - Other chassis parts
2. Tighten the bolts and nuts on the body parts listed below, if necessary.
  - Seat belt system
  - Seats
  - Doors and hood
  - Body mountings
  - Fuel tank
  - Exhaust pipe system
  - Other body parts
REPLACE CLEAN AIR FILTER SUB-ASSEMBLY
1. Remove the glove compartment assembly.
2. Remove the filter case from the filter outlet.
3. Remove the filter from the filter case.
4. Replace the filter with a new one.
5. The installation procedures are the removal procedures in reverse order.