Inspection Procedure

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

After the inspection is completed, clear the DTCs.

NOTE:

These codes may be output even if there is no malfunction.
If these codes are output frequently, replace the radio receiver.

CLEAR DTC
1. Clear the DTCs (See DTC CHECK / CLEAR ).
RECHECK FOR DTC
1. Recheck for DTCs and check if the same trouble occurs again.
  OK: Malfunction disappears.
  
  NG: REPLACE RADIO RECEIVER (See REMOVAL )
  
  OK: END