September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Steering Angle Sensor: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE NO. 2 STEERING WHEEL COVER LOWER
- REMOVE NO. 3 STEERING WHEEL COVER LOWER
- REMOVE STEERING PAD ASSEMBLY (See REMOVAL
)
- REMOVE STEERING WHEEL ASSEMBLY (See REMOVAL
)
- REMOVE TILT LEVER BRACKET (See REMOVAL
)
- REMOVE STEERING COLUMN COVER (See REMOVAL
)
- REMOVE SPIRAL CABLE SUB-ASSEMBLY (See REMOVAL
)
- REMOVE STEERING ANGLE SENSOR
- Detach the 6 claws and remove the sensor from the spiral cable.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002