LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Prius Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Brake Control Power Supply >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Brake Control Power Supply: Removal

  1. REMOVE REAR SEAT CUSHION ASSEMBLY  
  2. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH 
    1. Remove the deck trim side panel RH (See REMOVAL ) .

      HINT:

      Refer to the procedures from the removal of the rear door scuff plate RH up until the removal of the deck trim side panel assembly RH.

  3. REMOVE BRAKE CONTROL POWER SUPPLY ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the 4 bolts and brake control power supply.
  4. REMOVE NO. 3 BRAKE CONTROL POWER SUPPLY BRACKET 
  5. REMOVE NO. 2 BRAKE CONTROL POWER SUPPLY BRACKET 
  6. REMOVE NO. 1 BRAKE CONTROL POWER SUPPLY BRACKET 
    Fig 1: Installing Brake Control Power Supply Connector With Bolts
    G05189395Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals