September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Camshaft Position Sensor: Removal
- REMOVE RADIATOR SUPPORT OPENING COVER
(See REMOVAL
)
- REMOVE ENGINE UNDER COVER LH
- REMOVE ENGINE UNDER COVER RH
- DRAIN ENGINE COOLANT
(See COOLANT
)
- DRAIN HV COOLANT
(See REPLACEMENT
)
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE INVERTER WITH CONVERTER
- Remove the inverter with converter (see
REMOVAL
).
- REMOVE CAMSHAFT POSITION SENSOR
- Disconnect the sensor connector.
- Remove the bolt and sensor.