Section 61 (Air Conditioning (Service Information)): Compressor: Reassembly: Reassembly

WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL MAGNETIC CLUTCH ASSEMBLY
1. Matching the parts shown in the illustration, install the magnetic clutch stator.
  
  Fig 1: Identifying Magnetic Clutch Assembly Installation Positions
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a snap ring expander, install a new snap ring with the chamfered side facing up.
  
  Fig 2: Identifying Snap Ring With Chamfered Side Facing Up
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the connector.
4. Using a snap ring expander, install the magnetic clutch rotor and a new snap ring with the chamfered side facing up.
  
  Fig 3: Identifying Magnetic Clutch Washer And Magnetic Clutch Hub Component
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Install the magnetic clutch washer and magnetic clutch hub.
  NOTE:
  Do not change the combination of the magnetic clutch washer used before disassembly.
6. Using vise pliers, hold the magnetic clutch hub and install the bolt.
  
  Fig 4: Holding Magnetic Clutch Hub Component
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)