LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Matrix Base, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Engine Fuel System (2ZR-FE) >> Fuel Sender Gauge Assembly >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Sender Gauge Assembly: Removal

  1. DISCHARGE FUEL SYSTEM PRESSURE 
    1. Discharge fuel system pressure (See FUEL SYSTEM ).
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  3. REMOVE FUEL SUCTION TUBE ASSEMBLY 
    1. Remove the fuel suction tube assembly from the fuel tank assembly (See REMOVAL ).
  4. REMOVE FUEL SENDER GAUGE ASSEMBLY 
    1. Disconnect the fuel sender gauge connector.
      NOTE: Do not damage the wire harness.
    2. Release the lock and slide the fuel sender gauge assembly to remove it.
      NOTE: Make sure that the fuel sender gauge arm does not bend.
      Fig 1: Locating Fuel Sender Gauge Connector
      G06009823Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals