Inspection Procedure

CHECK CD
1. Check the CD.
  OK:
  
  The CD is clean .
  
  HINT:
  
  If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
  
  NOTE: Do not use a conventional record cleaner or antistatic preservative.
  
  Fig 1: Cleaning Disc
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NG: CLEAN CD
  
  OK: Go to Next Step
CHECK CD
1. Check that the CD is not deformed or cracked.
  
  Fig 2: Checking CD
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  OK:
  
  No deformation or cracks on the CD
  
  NG: CHANGE DISC
  
  OK: Go to Next Step
CHECK OPERATION
1. Check if the problem recurs using a known good CD.
  OK:
  
  Malfunction disappears .
  
  NG: Go to step 4
  
  OK: END
CHECK RADIO RECEIVER
1. Check the radio receiver installation condition.
  1. Check that the radio receiver is properly installed.
    OK:
    
    Radio receiver is properly installed .
    
    NG: REINSTALL RADIO RECEIVER PROPERLY
    
    OK: REPLACE RADIO RECEIVER (See REMOVAL )