LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Land Cruiser >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control/Dynamic Control System >> Crawl Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crawl Switch: Installation

  1. INSTALL CRAWL SWITCH 
    1. Attach the 4 claws to install the suspension control switch (CRAWL switch).
    2. Connect the connector.
  2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL CONSOLE CUP HOLDER BOX SUBASSEMBLY  (See INSTALLATION )
    Fig 1: Locating Suspension Control Switch
    G05630002Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL REAR UPPER CONSOLE PANEL SUBASSEMBLY  (See INSTALLATION )
  5. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  (See INSTALLATION )
  7. INSTALL LOWER INSTRUMENT PANEL PAD SUBASSEMBLY RH  (See INSTALLATION )
  8. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION  (See INSTALLATION )
  9. INSTALL LOWER INSTRUMENT PANEL PAD SUBASSEMBLY LH  (See INSTALLATION )
  10. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION  (See INSTALLATION )
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About LEMON Manuals