LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Highlander Base, 2.7 A >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (1AR-FE) - Circuit Testing, Component Inspection, Removal & Installation >> Knock Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Knock Sensor: Removal

  1. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold (See REMOVAL ).
  2. REMOVE KNOCK SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
      Fig 1: Locating Bolt And Sensor
      G05997207Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals