LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Highlander Base, 2.7 A >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (1AR-FE) - Circuit Testing, Component Inspection, Removal & Installation >> Air Fuel Ratio Sensor >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Air Fuel Ratio Sensor: Inspection

  1. INSPECT AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) 
    1. Measure the resistance according to the value (s) in the table below.

      Standard Resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      1 (HA1A) - 2 (+B) 20°C (68°F) 1.8 to 3.4 Ω

      If the result is not as specified, replace the air fuel ratio sensor.

      Fig 1: Identifying Air Fuel Ratio Sensor Connector
      G05997212Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals