LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - DTC P0604 - P2A03 >> DTC P0630 VIN not Programmed or Mismatch - ECM / PCM >> Inspection Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Inspection Procedure

  1. READ OUTPUT DTC (DTC P0630) 

    Result 

    1. Connect a Techstream to the DLC3.
    2. Turn the ignition switch ON and turn the tester ON.
    3. Select the following menu items: Powertrain / Engine and ECT / Trouble Codes.
    4. Read DTCs.

      Result 

      RESULT REFERENCE

      Display (DTC Output) Proceed To
      P0630 A
      P0630 and other DTCs B

      If any DTCs other than P0630 are output, troubleshoot those DTCs first.

      NOTE: If P0630 is set, the VIN must be input to the ECM using a Techstream. However, all DTCs are cleared automatically by the tester when inputting the VIN. If DTCs other than P0630 are set, check them first.

    B: GO TO DTC CHART  (See DIAGNOSTIC TROUBLE CODE CHART )

    A: Go to Next Step 

  2. INPUT VIN WITH TECHSTREAM 

    Refer to REGISTRATION .

    NEXT END 

scientia non olet · About LEMON Manuals