Crankshaft Position Sensor: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE V-RIBBED BELT (See REMOVAL )
REMOVE GENERATOR ASSEMBLY (See REMOVAL )
DISCONNECT COOLER COMPRESSOR ASSEMBLY (See REMOVAL )
REMOVE CRANKSHAFT POSITION SENSOR
1. Disconnect the crankshaft position sensor connector.
2. Remove the bolt and crankshaft position sensor.
  
  Fig 1: Locating Crankshaft Position Sensor With Mounting Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002