September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Steering Angle Sensor: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See
INITIALIZATION
).
- PLACE FRONT WHEELS FACING STRAIGHT AHEAD
- REMOVE LOWER NO. 3 STEERING WHEEL COVER
(See
REMOVAL
)
- REMOVE LOWER NO. 2 STEERING WHEEL COVER
(See
REMOVAL
)
- REMOVE STEERING PAD
(See
REMOVAL
)
- REMOVE STEERING WHEEL ASSEMBLY
(See
REMOVAL
)
- REMOVE LOWER STEERING COLUMN COVER
(See
REMOVAL
)
- REMOVE UPPER STEERING COLUMN COVER
(See
REMOVAL
)
- REMOVE SPIRAL CABLE SUB-ASSEMBLY
(See
REMOVAL
)
- REMOVE STEERING ANGLE SENSOR
- Detach the 6 claws and remove the sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002