LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Land Cruiser >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Speed Sensor >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Speed Sensor: Inspection

  1. INSPECT SPEED SENSOR NT 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      RESISTANCE SPECIFICATION

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 560 to 680 Ω

      If the result is not as specified, replace the sensor.

      Fig 1: Identifying Speed Sensor NT Connector Terminals
      G05629078Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT SPEED SENSOR SP2 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      RESISTANCE SPECIFICATION

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 560 to 680 Ω

      If the result is not as specified, replace the sensor.

      Fig 2: Identifying Speed Sensor SP2 Connector Terminals
      G05629079Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals