LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Except Hybrid) >> Cruise Control System >> DTC Check/Clear
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Check/Clear

  1. DTC CHECK 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Turn the tester main switch on.
    4. Select the following menu items: Powertrain / Cruise Control / Trouble Codes.
    5. Check the details of the DTC(s) (See DIAGNOSTIC TROUBLE CODE TABLE  ).
  2. DTC CLEAR 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Turn the tester main switch on.
    4. Select the following menu items: Powertrain / Cruise Control / Trouble Codes.
    5. Erase the DTCs.
scientia non olet · About LEMON Manuals