LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System >> SFI System >> DTC P0606 ECM / PCM Processor >> Inspection Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Inspection Procedure

  1. READ OUTPUT DTC (DTC P0606) 
    1. Connect a Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the tester ON.
    4. Clear DTCs (See DTC CHECK/CLEAR  ).
    5. Turn the ignition switch OFF and turn the tester OFF.
    6. Disconnect the tester.
    7. Disconnect the cable from the battery negative (-) terminal and wait for 1 minute.
    8. Connect the cable to the battery negative (-) terminal.
    9. Connect the tester to the DLC3.
    10. Turn the ignition switch ON.
    11. Turn the tester ON.
    12. Select the following menu items: Powertrain / Engine and ECT / Trouble Codes.
    13. Read DTCs.

      Result 

      RESULT REFERENCE

      Display (DTC Output) Proceed To
      No output A
      P0606 B

    B: REPLACE ECM  (See REMOVAL  )

    A: CHECK FOR INTERMITTENT PROBLEMS  (See CHECK FOR INTERMITTENT PROBLEMS  )

scientia non olet · About LEMON Manuals