LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control System >> Camshaft Timing Oil Control Valve Assembly >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Camshaft Timing Oil Control Valve Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. DRAIN ENGINE COOLANT  (See REPLACEMENT )
  3. REMOVE V-BANK COVER  (See REMOVAL  )
  4. REMOVE AIR CLEANER ASSEMBLY  (See REMOVAL  )
  5. REMOVE THROTTLE BODY BRACKET  (See REMOVAL )
  6. REMOVE OIL BAFFLE PLATE  (See REMOVAL )
  7. REMOVE NO. 1 SURGE TANK STAY  (See REMOVAL )
  8. REMOVE NO. 2 SURGE TANK STAY  (See REMOVAL )
  9. REMOVE INTAKE AIR SURGE TANK  (See REMOVAL )
  10. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Disconnect the 2 connectors.
    2. Remove the 2 bolts, then remove the 2 camshaft timing oil control valves.
      Fig 1: Identifying Camshaft Timing Oil Control Valve Assembly
      G05108954Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals