LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Corolla S, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1ZZ-FE) >> Accelerator Pedal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Accelerator Pedal: Removal

  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
  2. REMOVE ACCELERATOR PEDAL ASSEMBLY 
    1. Disconnect the accelerator position sensor connector [A].
    2. Remove the 2 bolts [B], then remove the accelerator pedal.
      Fig 1: Identifying Accelerator Position Sensor Connector And Bolts
      G05192750Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals