LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Yaris Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Brake Control System) >> Trouble Diagnosis >> CONSULT-II Function (ABS) >> Active Test >> Operation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Operation Procedure

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the CONSULT-II and CONSULT-II CONVERTER to the data link connector and start the engine.
    CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.
  2. Touch "START (NISSAN BASED VHCL)" on the display screen.
  3. Touch "ABS".

    If "ABS" is not indicated, go to " CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT  "  .

  4. Touch "ACTIVE TEST".
  5. The SELECT TEST ITEM screen is displayed.
  6. Touch necessary test item.
    Fig 1: Identifying CONSULT-II Display Screen - SELECT TEST ITEM
    G04814153
  7. With the "MAIN SIGNALS" display selected, touch "START".
  8. The Active Test screen will be displayed, so conduct the following test.
scientia non olet · About LEMON Manuals