LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Sienna CE >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System >> Navigation Receiver >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Navigation Receiver: Removal

  1. REMOVE INSTRUMENT CLUSTER NO.1 FINISH PANEL CENTER  (See REMOVAL )
  2. REMOVE INSTRUMENT CLUSTER NO.2 FINISH PANEL CENTER 
  3. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH  (See REMOVAL )
  4. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET 
    1. Remove the 4 screws.
    2. Disconnect the connector and remove the navigation receiver assembly with bracket.
      Fig 1: Identifying Navigation Receiver Assembly Bracket Screws
      G05141455Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL UPPER 
    1. Remove the 4 screws and the instrument cluster finish panel upper.
      Fig 2: Identifying Instrument Cluster Finish Panel Upper Screws
      G05141456Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
  6. REMOVE NO.1 NAVIGATION BRACKET 
    1. Remove the 4 screws and the No.1 navigation bracket.
      Fig 3: Locating No.1 Navigation Bracket Screws
      G05141457Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
  7. REMOVE NO.2 NAVIGATION BRACKET 
    1. Remove the 4 screws and the No.2 navigation bracket from the navigation receiver assembly.
      Fig 4: Locating No.2 Navigation Bracket Screws
      G05141458Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
scientia non olet · About LEMON Manuals