LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Sequoia SR5, RWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Ignition System >> VVT Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

VVT Sensor: Installation

  1. INSTALL VVT SENSOR 
    1. Attach the VVT sensor to the cylinder head.
    2. Install the VVT sensor with the bolt.

      Torque: 6.5 N.m (65 kgf.cm, 58 in.lbf) 

  2. INSTALL INTAKE MANIFOLD  (See appropriate INSTALLATION procedures)
  3. INSTALL THROTTLE BODY COVER SUBASSEMBLY 
scientia non olet · About LEMON Manuals