September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Throttle Body: Removal
- DRAIN ENGINE COOLANT
(see REPLACEMENT
)
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE V-BANK COVER SUB-ASSEMBLY
(see REMOVAL
)
- REMOVE AIR CLEANER CAP SUB-ASSEMBLY
(see REMOVAL
)
- REMOVE THROTTLE BODY
- Disconnect the 2 water by-pass hoses from the throttle body.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Disconnect the control motor connector.
- Remove the 4 bolts and throttle body and wire harness clamp stay.
- Remove the gasket from the intake air surge tank.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002