LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> RAV4 Base, 3.5 K, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2GR-FE) >> Knock Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Knock Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE INTAKE AIR SURGE TANK ASSEMBLY  (see REMOVAL )
  3. REMOVE INTAKE MANIFOLD  (see REMOVAL )
  4. REMOVE KNOCK SENSOR 
    1. Disconnect the 2 sensor connectors.
    2. Remove the 2 bolts and 2 sensors.
    Fig 1: Locating Knock Control Sensor Connectors And Bolts
    G04973904Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals