September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Crankshaft Position Sensor: Removal
- DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
(see REPLACEMENT
)
- DRAIN ENGINE COOLANT
(see REPLACEMENT
)
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE RADIATOR ASSEMBLY
- Remove the radiator assembly (See REMOVAL
).
- REMOVE FAN AND GENERATOR V BELT
(see REMOVAL
)
- DISCONNECT COMPRESSOR WITH PULLEY ASSEMBLY
(see REMOVAL
)
- REMOVE CRANKSHAFT POSITION SENSOR
- Disconnect the sensor connector.
- Remove the bolt and sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002