LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> RAV4 Base, 2.4 D, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 642 (Cruise Control System (Service Information)) >> Cruise Control Main Switch >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cruise Control Main Switch: Installation: Installation

WARNING: This page is about a different car, the 2010 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL CRUISE CONTROL MAIN SWITCH 
    Fig 1: Installing Cruise Control Main Switch
    GTY239594Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the switch with the 2 screws.

      Torque: 1.7 to 3.0 N*m (17.34 to 30.60 kgf*cm, 15.04 to 26.55 in.*lbf) 

    2. Connect the connector.
  2. INSTALL STEERING PAD ASSEMBLY  . Refer to INSTALLATION - Step 1
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  4. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light. Refer to DIAGNOSIS SYSTEM .
scientia non olet · About LEMON Manuals