Service Data
SERVICE DATA REFERENCE
| Front wheel alignment | Vehicle height | ||
| A-B: | 95 mm (3.74 in.) | ||
| D-C: | 62 mm (2.40 in.) | ||
| Toe-in (total) | 0° +-12' (0° +-0.2°, 0 +-2 mm, 0 +- 0.08 in.) | ||
| Rack end length difference | 1.5 mm (0.059 in.) or less | ||
| Wheel angle | Inside wheel | 40° 35' +-2° | |
| (40.58° +-2°) | |||
| Outside wheel: Reference | 34°15' | ||
| (34.25°) | |||
| Camber | -0° 35' +-45' (-0.58° +-0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Caster | 3°10' +-45' (3.17° +-0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Steering axis inclination | 12°35' +-45' (12.58° +-0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Rear wheel alignment | Toe-in (total) | 0°18' +-15' (0.30° +-0.25°, 3.0 +- 2.5 mm, 0.12 +-0.10 in.) | |
| Camber | -1°30' +-30' (-1.50 +-0.5°) | ||
| Right-left error | 30' (0.5°) or less | ||
| Front suspension | Lower ball joint turning torque | 0.98 to 4.90 N*m (10 to 50 kgf*cm, 8.7 to 43 in.*lbf) | |
| Stabilizer link turning torque | 0.05 to 1.96 N*m (0.5 to 20 kgf*cm, 0.4 to 17.4 in.*lbf) | ||
A : Ground clearance of front wheel center
B : Ground clearance of lower arm No.1 set bolt center
C : Ground clearance of rear axle carrier bush set bolt center
D : Ground clearance of rear wheel center