Steering Pad Switch: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE NO. 2 STEERING WHEEL COVER LOWER
- REMOVE NO. 3 STEERING WHEEL COVER LOWER
- REMOVE STEERING PAD ASSEMBLY (See INSTALLATION )
- REMOVE STEERING PAD SWITCH LH
- Detach the 2 claws and pull out the steering pad switch.
- Disconnect the connector and remove the steering pad switch.
- REMOVE STEERING PAD SWITCH RH
- Detach the 2 claws and pull out the steering pad switch.
- Disconnect the connector and remove the steering pad switch.