Inspection Procedure

1. Check the CD.

   OK: 

   The CD is clean. 

   HINT:

   If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   NOTE: Do not use a conventional record cleaner or antistatic preservative.

NG: CLEAN CD 

Fig 1: Cleaning Disc Surface With Soft Dry Cloth

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK: Go to next step 

1. Check that the CD is not deformed or cracked.

   OK: 

   No deformation or cracks on the CD. 

NG: REPLACE CD 

Fig 2: Checking Disc For Deformed Or Cracked

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK: Go to next step 

1. Check using another CD.
   1. Check if the problem recurs using another CD.

      OK: 

      The problem does not occur. 

OK: END 

NG: Go to next step 

1. Check the radio receiver installation condition.
   1. Check that the radio receiver is properly installed.

      OK: 

      Radio receiver is properly installed. 

NG: REINSTALL RADIO RECEIVER PROPERLY 

OK: REPLACE RADIO RECEIVER